2.

Cisco Monitoring Setup

> The following requires a Proxy Server to be created to securely send the data to the cloud.

> If you have not installed a proxy yet,​ follow this simple 10 minute guide.

3.

Cisco Monitoring Setup

Before proceeding, let's make sure the connection to the proxy is working.
> From within the Monro Cloud Monitoring Dashboard, click  Monitoring.
> Click  Hosts.
> You will see a default host called  Gateway-CompanyName
> Click  Latest Data

4.

Cisco Monitoring Setup

> If the  Last Value  is less than 5 minutes, the proxy is syncing correctly.
> If it is greater than 5 minutes, contact support at  support@monrocloud.com if you need assistance.

5.

Cisco Monitoring Setup

Now that we have confirmed the Proxy and Monro Cloud are talking, lets setup SNMP on the Cisco device.
In this example we will use a Cisco C9800 Wireless Lan Controller.
> Log into your Cisco Wireless LAN Controller
> Navigate to  Administration >  SNMP

6.

Cisco Monitoring Setup

> Enable SNMP by sliding the switch.
> Navigate to  V3 User Groups
>  Click  Add
> Enter a Group Name
> Set Security Level to Priv
> Set Read and Write view to v1 Default
> Click Apply to Device

7.

Cisco Monitoring Setup

> Navigate to V3 Users
> Enter a User Name
> Select the Group Name you created in the previous step
> Set Security Mode to AuthPriv
> Set the Authentication Protocol to SHA
> Set the Authentication Password
> Set Privacy Protocol to AES128
> Set the Privacy Password
> Click  Apply to Device

8.

Cisco Monitoring Setup

We now need to setup discovery rules for your proxy so Monro Cloud knows which devices to manage. 
> Click here to access the tool.
> Select Yes
> Enter the email address registered with your account.
> Enter your Company name (​Monitoring > Hosts > ​Gateway-CompanyName).
> Enter the IP range as either: single IP address, a range like 10.10.56.0-255 or multiple ranges like 10.10.56.0-255, 10.11.56.0-255.
> Enter the same Authentication Passphrase from previous steps.
> Enter the same Privacy Passphrase from previous steps.
> Click  Create Discovery Rule.

9.

Cisco Monitoring Setup

We now need to setup network rules for your proxy so Monro Cloud knows what devices and IP addresses to manage. 
> Wait a few minutes for the verification to complete.
> You will be presented with your current discovery rules.
> If you have made a mistake, simply navigate to Delete Proxy Rules to delete them and start again.
> If you accidentally closed the page, use this tool to Get a List of Proxy Rules.

10.

Cisco Monitoring Setup

Behind the scenes, many automated tasks have been completed for you and you can now see your active devices.
Inside your Monro Cloud Monitoring account:
> Select  Data Collection >  Hosts
> You should now see the Cisco device, in this example the device was called  WLC .
> 12 Default Items are already monitoring your device such as Ping and Device Uptime.
> Step 11 will show you how to configure more granular monitoring.

11.

Cisco Monitoring Setup

> Click on your host from Data Collection > Hosts.
> Click  Unlink next to Generic by SNMP.
> Click Select next to Templates.
> Click Select again.
> Select  Templates/Network devices.
> Select  Cisco IOS by SNMP or any other relevant template.
> Click  Update.
> You will now see an extensive list of Items against the device.

12.

Cisco Monitoring Setup - COMPLETE

> Select  Dashboards  to see active information about your Cisco appliance.